Commercial▶
Northern NJ · NYCBook an estimateBook
Process

PROCESS

How a wall goes from blank to burnished. About a week of work per wall, plus the planning before it.

Five stages,
one hand.

01

Consult & plan

Site photos and dimensions, then the palette and how the veining will flow across the whole wall. Approved before anything starts.

02

Prep & prime

The wall has to be flat, sound and primed. Gloss exposes every flaw, so this stage decides the result.

03

Base coats

Thin coats in the ground color, sanded between coats.

04

Veining & color

Layered color and veining with trowels, spatulas, sponges and brushes, with metallic pigment where the design calls for gold.

05

Burnish & seal

Steel trowel and machine buffing bring up the glass-like sheen. Wax or a protective topcoat is chosen for the room, wet or dry, high traffic or not.

What we need
from you.

Three things get an estimate moving.

PhotosOf the wall and the room around it
DimensionsHeight, width, anything in the way
MoodAny colors, references or finishes you love
At a glance
Typical jobAn 8 × 10 ft wall or a bathroom
Time on siteAbout a week per wall
Deposit20% of the estimate
CareSoft cloth, mild soap. Care guide
WarrantyOn our workmanship. Details

Caring for
your wall.

Hand-applied plaster is durable and easy to live with. A little care keeps the sheen deep for years.

The first weeks

Your wall needs time to fully cure and harden. Keep it dry, and avoid hanging heavy items, taping or scrubbing for the first few weeks. Nassim will tell you the exact timing for your finish.

Everyday

Dust with a soft, dry microfiber cloth. For marks, use a clean cloth dampened with warm water and a drop of mild, pH-neutral soap, then dry right away with a soft cloth.

Please avoid

  • Abrasive pads, powders and scrubbing
  • Ammonia, bleach, vinegar and other strong or acidic cleaners
  • Steam cleaners
  • Tape, sticky hooks and adhesives on the surface
  • Dragging furniture or hard objects across the wall

Showers & wet areas

Wipe or squeegee after use and keep the room ventilated. Use only pH-neutral cleaners. Standing water and harsh bathroom products shorten the life of any sealer.

Keeping the sheen

Walls that are touched often, such as corridors and bar fronts, can lose some gloss over time. They can be re-waxed or re-burnished to bring it back, and we will advise how often for your space.

It’s handmade

Subtle changes in tone, sheen and veining across a wall are part of the look. Scuffs and small marks can usually be repaired by re-burnishing or touching up. Tell us and we will advise.

Our
warranty.

We stand behind our work. If the finish fails because of how it was applied, such as peeling, flaking or cracking caused by application, we will repair it at no charge for one year from completion.

The warranty does not cover cracks or movement in the wall or building underneath, moisture or leaks, impact or abrasion damage, harsh or incorrect cleaning products, or the natural variation of a hand-made finish. Full terms are in your written agreement.

Questions,
answered.

How does an estimate work?
It starts with photos and rough dimensions of your wall. Nassim then looks at the space with you, talks through colors and how the veining should flow, and gives you an estimate. Once you approve the design direction and pay the deposit, we schedule the install.
How much does a wall cost?
Every wall is custom, so there is no price list. The price depends on the size and height of the wall, the colors and metallics, details such as rounded edges and niches, and whether it is a wet area. Send us photos and we will give you a clear estimate.
What is the smallest job you take?
Typically about an 8 × 10 ft wall, or a bathroom.
How long does it take?
About a week of work per wall, plus planning before we start. Larger or more detailed walls take longer, and we will tell you in your estimate.
What is the deposit?
The deposit is 20% of the estimate. It is paid after you approve the design and before we schedule the install.
Is it real marble?
No. It is hand-applied Venetian plaster, polished to look and feel like stone. That is why it can flow across a whole wall without seams, and why no two walls are the same.
Will my wall look exactly like the photos I have seen?
It will be in the same family, but never identical. Each wall is designed for your space, and the palette and veining direction are agreed before we begin. Natural variation is part of any hand-made finish.
Can it go in a shower or bathroom?
Yes. Wet areas are sealed with a protective finish chosen for the location. For some exteriors and heavy-wear surfaces, micro-cement may be the better choice, and we will tell you honestly which one suits your space.
Which finishes do you offer?
Marble and onyx-style Venetian plaster is our signature. We also work in marmorino, lime plaster and micro-cement. See Finishes.
How do I take care of it?
Dust with a soft cloth and wipe marks with a damp cloth and mild soap. The care guide above has the full list, including what to avoid.
What if it gets damaged?
Tell us what happened and we will advise. Scuffs and small marks can usually be repaired by re-burnishing or touching up, and defects in our workmanship are covered by the warranty above.
Where do you work?
Northern New Jersey and New York City, and we are open to commissions further away. We travel and do the work ourselves.
Do you work with designers, architects, builders and businesses?
Yes. We work directly with owners, and with the designers, architects and builders who shape the space. See Commercial & Trade.
Are you licensed and insured?
Yes. Our work is done through Pro Team Remodeling LLC, a New Jersey registered home improvement contractor with general liability insurance. A certificate of insurance is available on request.
Do you offer training?
Yes. We offer private one-to-one training with Nassim. See TrainingFAQ.

Something we missed? Ask us.

Tell us about
your wall.

Request an estimate →